Detergent Raw Materials

Your Professional Detergent Raw Materials Supplier

Hebei Haoyue New Material Technology Co., Ltd. specializes in the production of diacetate fiber tow, cellulose, and cigarette filter rods. The fiber tow finds application in cigarette filters, yarn textiles, medical care products, and home textile filling materials. Chemical products are extensively utilized across various industries, including chemicals, construction, building materials, coatings, food, cosmetics, agriculture, national defense, and military sectors.

High-Quality Products

The company has obtained ISO9001:2015 international quality management system certification, ensuring that its product quality aligns with international advanced standards.

Advanced Equipment

The factory is equipped with state-of-the-art production equipment, guaranteeing both product quality and production efficiency.

Accept ODM/OEM Service

We provide the best private label OEM and ODM services to meet different customers.

Sustainable Production

Our factories prioritize environmental protection and adopt sustainable production practices to minimize ecological impact.

First 12 3 4 5 6 Last

Parameters

Parameter	Specification
Appearance	Colorless to pale yellow liquid
Active Matter Content	30-100%
PH (1% aqueous solution)	5.0-9.0
Surface Tension (0.1%, mN/m)	≤30
Foam Height (Ross-Miles method, 0.25%, 40°C)	≤50mm (after 5 minutes)
Biodegradability	≥90% (28 days)

Types of Detergent Raw Materials

The detergent raw materials produced by our company mainly include the following types:

Sodium Dodecyl Sulfate (SLS)

Sodium dodecyl sulfate is an anionic surfactant and a typical representative of sulfate ester surfactants. It is also known AS SDS, SLS, As, K12, sodium coconut oil alcohol sulfate, sodium lauryl alcohol sulfate, and a foaming agent.

Bubbling Agent

Foaming agent is a chemical additive that can produce gas under specific conditions and form uniform and stable foam. It is widely used in industries such as plastics, rubber, building materials, daily chemicals, and food packaging.

N-Methyldiethanolamine

N-Methyldiethanolamine, also known as N-methyl diethanolamine and more commonly as MDEA, is the organic compound with the formula CH3N(C2H4OH)2.It is a colorless liquid with an ammonia odor.It is miscible with water,ethanol and benzene.

Advantages of Detergent Raw Materials

Sodium Dodecyl Sulfate (SLS)

Sodium Dodecyl Sulfate (SLS) have many advantages, including:
● Dissolves oily residue more effectively than plain water alone
● Has detergent-like properties that allow it to capture dirt particles so they can be rinsed away easily with water or wiped off with a cloth
● Its mild nature also makes it safe for use on most materials without causing damage over time.
● Biodegradable and environmentally friendly due to its non-toxic nature
● One of the most popular choices for both household and commercial cleaning applications.

Bubbling Agent

Bubbling Agent have many advantages, including:
● Cost Savings: By reducing the raw materials needed in production, foaming agents can cut material costs significantly, potentially lowering plastic expenses by 20-50% through the use of foamed plastics and polymers.
● Sustainable Manufacturing: They facilitate the creation of products with less material, minimizing waste and promoting eco-friendly manufacturing practices.
● Lightweighting: Foaming agents enable the production of lightweight products without compromising strength, enhancing transportation efficiency and reducing fuel consumption.
● Energy Savings: Foamed materials improve insulation, which can lower energy costs in buildings and appliances by up to 30% through effective heating and cooling efficiency.
● Drives Competitiveness: The cost savings and enhanced properties of foamed materials provide African manufacturers with a competitive edge in global markets.

N-Methyldiethanolamine

N-Methyldiethanolamine have many advantages, including:
● Versatility and Polyfunctionality: MDEA's ability to act as both an amine and an alcohol makes it useful in various applications, including coatings, textile lubricants, and pharmaceuticals.
● Low Heat of Reaction: MDEA has a relatively low heat of reaction with H2S and CO2, which translates to lower energy demands for regeneration in gas treating processes.
● Low Vapor Pressure: This property allows for higher amine concentrations without significant losses during the absorption and regeneration processes.
● Good Chemical Stability: MDEA is resistant to thermal and chemical degradation, ensuring its long-term performance in industrial applications.

Storage Considerations for Bubbling Agent (Detergent Raw Materials)

Temperature Control
One of the most important factors in storing blowing agents is temperature. Different types of blowing agents have different temperature requirements, but in general, you want to keep them in a cool environment. Most blowing agents are sensitive to heat, and high temperatures can cause them to decompose prematurely. This not only affects their performance but can also be a safety hazard.

Humidity Management
Humidity is another biggie when it comes to storing blowing agents. Moisture can react with many blowing agents, leading to chemical changes and reduced quality. You want to keep the storage area dry, with a relative humidity below 60%.

Storage Containers
The type of container you use to store blowing agents is super important. You need containers that are made of materials that are compatible with the blowing agent. For most blowing agents, high - density polyethylene (HDPE) or stainless - steel containers are good choices.

Ventilation
Proper ventilation in the storage area is a must. Blowing agents can release small amounts of gases over time, and some of these gases can be harmful if inhaled in large quantities. You need to have good air circulation in the storage room to remove any potentially dangerous gases.

Fire And Explosion Prevention
Blowing agents can be flammable or combustible, so fire and explosion prevention is a top priority. Store blowing agents away from sources of ignition, such as open flames, electrical sparks, and hot surfaces.

Light Exposure
Some blowing agents are sensitive to light, especially ultraviolet (UV) light. Prolonged exposure to light can cause them to degrade and lose their effectiveness. So, store blowing agents in a dark place or use opaque containers to protect them from light.

Packaging and Shipping

Packaging

● 20 kilograms per bag: Kraft paper bag lined with PE film, moisture-proof and sealed.

● 50 kilograms per drum: Packed in plastic drums, suitable for large-scale industrial customers.

● Customized repackaging: 1kg/5kg small packages are available to meet the needs of R&D or small-batch production.

Shipping

● If the quantity is not big or you need it urgently, we advise you to ship them by Express such as DHL, FEDEX, UPS, TNT etc.

● If your quantity is large, we advise you to use Sea shipping or Air shipping.

Our Factory

The company's strong economic strength and abundant human resources have laid a solid foundation for the company's long-term development. Excellent quality, affordable prices, and thoughtful service are the goals pursued by our company.

productcate-1-1

FAQ

Q: How does foaming agent work?

A: A foaming agent is a material such as a surfactant or a blowing agent that facilitates the formation of foam. A surfactant, when present in small amounts, reduces surface tension of a liquid (reduces the work needed to create the foam) or increases its colloidal stability by inhibiting coalescence of bubbles.

Q: What are the different foaming agents?

A: Foaming agents are classified as; (a) physical foaming agents that expand when pressure is released (e.g., nitrogen and carbon dioxide) and (b) chemical foaming agents that decompose or react to form a gas (e.g., sodium bicarbonate in the presence of acid).

Q: What is the purpose of an anti foaming agent?

A: Antifoaming agents are added to prevent or counter the foam generation in the formulation. Generally, these agents have surface active properties and are insoluble in the foaming medium.

Q: What is the best foaming agent for liquid soap?

A: Sodium lauryl sulfate (SLS) is a high-foaming agent that produces photogenic and long-lasting lather. It is widely used in household cleaning products and personal care products like facial cleansers for its effectiveness.

Q: How to make foaming agent?

A: It is made by the following method: first, mix cement, water, etc., according to a certain mass ratio, mix evenly, and prepare cement concrete slurry. Then stir the egg white with a mixer at high speed to form a uniform and fine closed-cell foam.

Q: What is the difference between a defoamer and an antifoam agent?

A: The key difference between defoamer and anti-foam is that anti-foam agents can prevent foam from forming, whereas defoamers can control the amount of existing foam. Therefore, anti-foam agents prevent foam formation while defoamers reduce existing foam.

We're well-known as one of the leading detergent raw materials manufacturers in China. Please feel free to buy cheap detergent raw materials in stock here and get free sample from our factory. For price consultation, contact us.

ADBAC, Cdea Chemical, CAB 30